9
ASSEMBLY STEP 4
A Open HARDWARE BAG 3.
B Fold up treadmill.
NOTE: Lock latch must be securely engaged
before proceeding with assembly.
C Attach the right ROLLER END CAP using 2
SCREWS (F).
D Repeat on the other side.
E Before the first use, lubricate the treadmill
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
GUIDE.
SCREW (F)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
SCREWS (F)
ROLLER END CAPS
YOU ARE FINISHED!
To Next Page
Loading...
