To Next Page
G
gillanthonyAug 4, 2025
What to do if Merivaara Medical Equipment table will not activate when pressing ON/OFF-button?
- JJustin ValdezAug 5, 2025
If your Merivaara Medical Equipment table won't activate when you press the ON/OFF button, first, ensure the Main Switch is in the ON position. Next, check the Hand Control Unit connection. If it still fails, the Hand Control Unit may be faulty, or the cable might be broken, requiring replacement. Also, check if the batteries are empty and connect the mains cable to recharge them. A blown battery fuse could also be the cause, so check and replace it if necessary. Finally, a faulty MPC might be the reason, and it would need replacement.
General
