Need help?Do you have a question about the Merivaara PRACTICO and is the answer not in the manual?
Defines the primary surgical applications and general information for the operating table.
Instructions for unpacking the operating table and checking for shipping damage.
Steps to safely remove the operating table from its pallet for use.
Details about the information found on the table's identification plate.
Explanation of the various symbols used on the product and documentation.
Lists the primary materials used in the construction of the operating table.
Details on environmental conditions and electrical specifications of the table.
Specifies operating and storage temperature, pressure, and humidity ranges.
Provides information on battery, current consumption, charger, and operating times.
Details the table's classification according to safety and performance standards.
Lists the range and specifications for various table adjustments (height, tilt, sections).
Provides detailed weight and dimensional specifications for different configurations.
Overview of the main structural components of the operating table.
Identifies and labels the key parts and assemblies of the operating table.
Recommended procedures for ensuring continued maintenance and trouble-free operation.
Daily checks and cleaning procedures to maintain the operating table.
Monthly lubrication, checks, and functional tests for the operating table.
Annual inspection and servicing requirements for the operating table.
Guides for diagnosing and resolving common malfunctions and issues with the table.
Step-by-step instructions for removing various casings from the table base and column.
Specific procedure for removing the table base casing.
Procedure for removing the casing when the table height is adequate.
Steps for removing the casing when it needs to be repositioned.
Instructions for detaching the upper end of the bellows.
Procedure for removing the casings from the table column.
Troubleshooting steps for a stuck height adjustment motor.
Procedures for replacing key components within the table base.
Instructions for safely removing and replacing the battery pack.
Steps for accessing and replacing the main control unit.
Procedure for removing and replacing the table's power source.
Instructions for replacing the charging and charge status controller.
Information on locating and replacing main, battery, and power source fuses.
Specifics on replacing the main fuses.
Procedure for accessing and replacing the battery fuse.
Guidance on replacing fuses located within the power source.
Detailed procedures for removing and mounting various motors.
Steps for removing and mounting the height adjustment motor.
Procedure for removing and mounting the back section adjustment motor.
Instructions for removing the motor that controls Trendelenburg tilt.
Steps for installing a new Trendelenburg motor.
Procedure for removing the motor that controls the side tilt function.
Steps for installing a new side tilt motor.
Procedure for replacing the motor for mattress base longitudinal adjustment.
Detailed procedures for replacing various gas springs on the table.
Steps for removing the Trendelenburg gas spring.
Procedure for installing a new Trendelenburg gas spring.
Instructions for removing the side tilt gas spring.
Steps for installing new side tilt gas springs.
Procedure for replacing the gas spring for the head section.
Steps for removing a gas spring from its protective tubing.
Procedure for replacing the gas spring for the back section.
Instructions for replacing the gas spring for the leg section.
Procedures for removing and replacing the table's castors.
Steps for adjusting the castors, including brake function.
Instructions for adjusting the column wedges for proper alignment.
Steps for removing and reinstalling the back section of the table.
Diagrams illustrating the electrical and functional schematics of the table.
Detailed instructions for cleaning and disinfecting the table after each use.
Specifics on using disinfectants for various types of stains and contamination.
Proper procedure for drying the table after cleaning or disinfection.
Guidance on recycling different materials like steel, zinc, aluminium, and plastics.
Specific instructions for the disposal and recycling of gas springs.
General| Category | Medical Equipment |
|---|---|
| Frame Material | Stainless Steel |
| Weight capacity | 250 kg |
| Power Source | Electric |
| Lifting Range | 600 mm to 1050 mm |
| Wheel Type | Central Locking |
To Next Page
