Merivaara PRACTICO - 2.1 Removing Packaging; 2.2 Removal from Pallet

8
2.1 Removing packaging
The operating table is preassembled in its packaging. Inspect the operating table for any shipping damage.
NOTE! If the operating table has been in the cold, allow it to warm up at room temperature for at least
6 hours befo re recharging the battery or sw itchin g on, to allow any con den sation formed
to evap orate .
NOTE! All pack ag in g cardb oa rd sh ou ld be recycle d . Wood and pl as tics are en e rgy wa ste .
2.2 Removal of operating table from pallet.
• Unscrew the M10x75 screw under th e pallet.
• The permitted lifting area is indicated in Figure A.
NOTE! Th e op e ratin g tab le is h ea vy (165/175 kg).
!
!
o
1
0
4
5
b
.
p
d
f
M10x75
!