2
1 WARNINGS AND OBSERVATIONS
5
2 GENERAL
7
2.1 Opening pack a ging 8
2.2 Removing o pera ting tab l e from pal let 8
3 TECHNICAL SPECIFICATIONS
9
3.1 Type plate 9
3.1.1 Figure symbols 9
3.1. 2 S urface materia l s 9
3.2 Proper ties 10
3.2.1 Environmental conditions 10
3.2. 2 El ectrica l properties 10
3.2.3 Rating specifications 10
3.2.4 Settings 11
3.2.5 Weights and dimensions 11
3.3 Structure 12
3.3.1 Ma in com ponents 12
4 MAINTENANCE AND REPAIR
13
4.1 Maintenance procedures 13
4.1. 1 D aily maintenance 13
4.1. 2 M o nthly maintenance 13
4.1.3 Annual maintenance 13
4.2 Troubles ho oting a nd checklist 14
4.3 Remova l of ca s i ngs 15
4.3.1 Table base casing 15
4.3. 2 W hen table ba s e cas ing heigh t is sufficient 15
4.3.3 When table base casing is to be raised and turned 15
4.3.4 Removal of upper bellows end 15
4.3.5 Removal of column casings 16
4.3.6 Height adjustment motor stuck in lowest position 16