Merlin E970M - User Manual

1. Programming - Merlin Security+ 2.0 door opener systems
The remote is preset for use with Merlin Security+ 2.0 systems, so for EVO door opener
models with this code, simply program in the usual manner. Refer to the WIRELESS
PROGRAMMING section in your Opener Operating Manual.
NOTE: If you are unsure what code has been set previously,
use the Security+ programming sequence on page 2.
1. Press & hold the button on the remote you wish to use.
2. Press & release the LEARN button on the opener.
3. Release the remote button when the opener light flashes.
The code has been learnt and the next press of the remote button should activate the door.
E970M - Four Button Remote Control
LED
Press and hold the
button on the remote
control you wish to use.
The LED indicator on
the transmitter flashes
continuously.
Press and
immediately release
the Learn button.
“click”
“click”
2 3
1
Initially: Locate the LEARN button on your particular opener and identify the button on
the remote you wish to use. Do not select a button already in use.
The Merlin Four Button Control can be used with both Merlin Security+ and
Security+ 2.0 codes (dual function).
4 buttons are available and any button can be programmed with either code.
S P
1 2 3
123 2
LEARN
BUTTON
ROLLER DOOR OPENER
LEARN
BUTTON
LED
INDICATOR
SECTIONAL DOOR
OPENER
LEARN
BUTTON
LED
INDICATOR
DN
UP
P
S
1
2
3
LEARN
BUTTON
LED
INDICATOR
OR
To prevent possible SERIOUS INJURY or DEATH:
The opener light flashes
or 2 clicks are heard
when it has learnt the code
•Do not ingest battery, Chemical Burn Hazard.
•This product contains a coin cell battery. If the coin cell battery
if swallowed, it can cause severe internal burns in just 2 hours
and lead to death.
•Dispose of used button batteries immediately and safely.
Flat batteries can still be dangerous
•Keep new and used batteries away from children.
•If the battery compartment does not close securely, stop
using the product and keep away from children.
•If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.

Summary

Programming Merlin Security+ 2.0 Door Opener Systems

Program Remote for Security+ 2.0

Steps to program the Merlin remote for Security+ 2.0 systems, including locating buttons and opener.

General Safety Warnings

Battery Safety Precautions

Warning about ingesting coin cell batteries, chemical burn hazard, and keeping batteries away from children.

Programming Merlin Security+ Door Opener Systems

Enter Remote Programming Sequence

Instructions to enter programming mode on the remote and then on the opener.

Select Button and Lock Code

Steps to select a remote button, program it, and lock the code.

How to Use the Remote

Remote Operation Range

Guidance on pressing the button and the remote's typical operating range.

Remote Control Battery Replacement

Replace Lithium Battery

Instructions on how to replace the remote's lithium battery, including tools and battery type.

4-Button Remotes Functionality

Program Additional Devices

Information on programming additional buttons for other devices like openers, gates, or access systems.

One Year Limited Warranty

Warranty Terms and Consumer Rights

Details the warranty period, rights under consumer law, and remedies for defects.

Merlin E970M Specifications

General

Device Type	Remote Control
Brand	Merlin
Model	E970M
Frequency	433.92 MHz
Battery	2 x AAA
Material	Plastic
Color	Black