1. Programming - Merlin Security+ 2.0 door opener systems
The remote is preset for use with Merlin Security+ 2.0 systems, so for EVO door opener models with this code, simply program in the usual manner.
Refer to the WIRELESS PROGRAMMING section in your Opener Operating Manual.
NOTE: If you are unsure what code has been set previously, use the Security+ programming sequence on page 2.
1. Press & hold the button on the remote you wish to use.
2. Press & release the LEARN button on the opener.
3. Release the remote button when the opener light flashes. The code has been learnt and the next press of the remote button should activate the door.
E960M - Premium+ Remote
LED
ROLLER DOOR OPENERS
LEARN
BUTTON
LED
INDICATOR
SECTIONAL DOOR OPENERS
LEARN
BUTTON
LED
INDICATOR
Press and hold the
button on the
remote control you
wish to use. The
LED indicator on the
transmitter flashes
continuously.
Press and
immediately
release the
Learn button.
“click”
“click”
The opener
light flashes
or 2 clicks are
heard when
it has learnt
the code.
2 3
1
Initially: Locate the LEARN button on your
particular opener and identify the button on
the remote you wish to use. Do not select
a button already in use.
The Merlin Premium+ Remote can be used with both Merlin Security+
and Security+ 2.0 codes (dual function).
4 buttons are available and any button can be programmed with either code.
S P
1 2 3
123 2
LEARN
BUTTON
DN
UP
P
S
1
2
3
OR
LEARN
BUTTON
LED
INDICATOR
OR
©
To Next Page
Need help?
General
