EasyManua.ls Logo

Meross MSS315 User Manual

Meross MSS315
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
Safety Information
It is recommended that the device is used indoors in a dry
location only.
This device shall be used within its rated power included in
the product specifications on the label.
Make sure this device is fully plugged in and kept out of reach
of children for safety concerns.
Do not use the device where wireless devices are not allowed.
Do not plug in this device one after the other.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
The device is not intended for use in locations where the
temperature may be less than actual room conditions, such
as unheated warehouses or garages. Please read the
operating information on the minimum and maximum
operating temperatures on the manual or the website.
Do not place near heat sources or heat-producing devices.
Do not expose this product to mechanical shock such as
crushing, bending, puncturing, or shredding. Avoid dropping
or placing heavy objects on this product.
Do not use this product if visible defects are observed or if it
has been damaged or modified. Contact the meross support
for assistance.
Do not attempt to disassemble, open, microwave, incinerate,
paint, insert foreign objects into this product.
Attempting to open or service the unit voids all warranties,
express or implied. If you experience problems with the
device, discontinue use, unplug the device and contact
meross support for assistance.
Question and Answer IconNeed help?

Do you have a question about the Meross MSS315 and is the answer not in the manual?

Meross MSS315 Specifications

General IconGeneral
BrandMeross
ModelMSS315
CategoryAccessories
LanguageEnglish

Summary

LED and Button Rules

Power Button

Instructions for the power button, including turning the device on/off and factory reset procedures.

Status LED Indicators

Explanation of LED states for initialization, firmware upgrading, Wi-Fi connection, pairing, and no internet connection.

Related product manuals