Lighting Control Switch Version: A0
Page 9 of 11
8.Remote Control
9. Initialization
1/ On/Off function /3-step dimming function:
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During
the initialization, the sensor is not able to detect movement.
2/ 2-step dimming function:
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low
light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement.
To Next Page
Loading...