Need help?Do you have a question about the Merrytek MC054V-RC-2A and is the answer not in the manual?
Controls light on/off based on motion detection and ambient light conditions.
Dims light to a low level when no motion is detected after the hold time expires.
Dims light to a low level after hold time if no new motion is detected.
Provides dimensional drawings for specific models of the lighting control switch.
Illustrates detection coverage patterns for various ceiling mounting heights and sensitivities.
Illustrates detection coverage patterns for wall mounting at different heights and sensitivities.
Details the buttons and their corresponding functions on the remote control unit.
Describes the sensor's behavior upon power-up for On/Off and 2-step dimming functions.
General| Type | Microwave Motion Sensor Switch |
|---|---|
| Operating Frequency | 50/60Hz |
| Hold Time | 5s, 30s, 90s, 3min, 20min, 30min |
| Stand-by Power | <0.5W |
| Microwave Frequency | 5.8GHz ±75MHz |
| Power Source | AC |
To Next Page