Meru Networks AP1020i User Manual

66 Meru Access Point Installation Guide © 2010 Meru Networks, Inc.
Restoring AP1000 Settings
AP1000 Beta Test
Restoring AP1000 Settings
Trigger the Restore mechanism to return the AP1000 to the factory default settings. This overrides any
changes that have been made from the controllers. Note that this restore mechanism differs from the
ones on the other APs. Instead of a straight paper clip, you need to use a paper clip bent at a right
angle to push the mechanism trigger located on the inside. Access it through the small hole with the
bent paper clip. Press and hold the button for 10 seconds. After 10 seconds, the AP reboots and comes
back up with default settings.
Figure 43: AP1000 Ethernet Port
00248
13

Meru Networks AP1020i Specifications

General

Brand	Meru Networks
Model	AP1020i
Category	Wireless Access Point
Language	English