Need help?Do you have a question about the Meru Networks AP200 and is the answer not in the manual?
General| Model | AP200 |
|---|---|
| Device Type | Wireless Access Point |
| Wireless Standards | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 300 Mbps |
| MIMO Technology | 2x2 MIMO |
| Power over Ethernet | Yes |
| Encryption Algorithm | WPA, WPA2, AES, TKIP |
| Power over Ethernet Standard | 802.3af |
| Mounting | Ceiling, Wall |
| Dimensions | 160 x 160 x 41 mm |
| Weight | 0.45 kg |
| Form Factor | Ceiling/Wall Mountable |
| Features | VLAN Support |
| Compliant Standards | IEEE 802.11a/b/g/n |
| Antennas | Internal |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Dimensions (mm) | 160 x 160 x 41 |
Identifies the intended audience for this installation guide.
Lists additional resources forMeru Access Point information.
Explains the formatting conventions used in the document.
Provides contact information for Meru Networks support.
Details methods for obtaining technical assistance.
Information regarding the product's warranty.
Details the features and configurations of the AP300 series.
Details the features of the AP320i internal-antenna access point.
Describes the specifications and models of the AP200 series.
Highlights the features of the AP150 access point for WLAN.
Details the features of the OAP180 Rugged Access Point.
Important safety instructions before installing the AP300.
Recommendations for optimal performance in mixed AP networks.
Instructions for unpacking the AP300 and verifying contents.
Guidance on power sources and requirements for AP300.
Lists items needed to complete AP300 installation.
Step-by-step instructions for installing the AP300.
Procedure for attaching antennas to the AP300.
Instructions for installing the optional remote antenna mount.
Procedure for installing an optional external antenna.
Procedure for installing an optional external six-connector antenna.
Instructions for installing single antennas per radio.
Instructions on physically mounting the AP300.
Detailed steps for mounting the AP300 below a suspended ceiling.
Instructions for mounting the AP300 above a suspended ceiling.
Procedure for mounting the AP300 in a Hoffman enclosure.
Guide to interpreting AP300 status LEDs.
Next steps after installing the AP300.
Important safety instructions before installing the AP320i.
Recommendations for optimal performance in mixed AP networks.
Instructions for unpacking the AP320i.
Guidance on power sources and requirements for AP320i.
Lists items needed to complete AP320i installation.
Step-by-step instructions for installing the AP320i.
Procedure for mounting the AP320i on a suspended ceiling.
Instructions for mounting the AP320i above a suspended ceiling.
Procedure for mounting the AP320i vertically on a wall.
Instructions for placing the AP320i on a shelf.
Instructions for mounting the AP320i below a recessed ceiling.
Guide to interpreting AP320i status LEDs.
Next steps after installing the AP320i.
Important safety instructions before installing the AP200.
Instructions for unpacking the AP200 and verifying contents.
Lists items needed to complete AP200 installation.
Step-by-step instructions for installing the AP200.
Procedure for attaching antennas to the AP200.
Instructions on physically mounting the AP200.
Detailed steps for mounting the AP200 below a suspended ceiling.
Instructions for mounting the AP200 above a suspended ceiling.
Next steps after installing the AP200.
Guide to interpreting AP200 status LEDs.
Important safety instructions before installing the AP150.
Instructions for unpacking the AP150.
Lists items needed to complete AP150 installation.
Step-by-step instructions for installing the AP150.
Procedure for attaching antennas to the AP150.
Instructions on physically mounting the AP150.
Detailed steps for mounting the AP150 below a suspended ceiling.
Guide to interpreting AP150 status LEDs.
Next steps after installing the AP150.
Important safety instructions before installing the OAP180.
Instructions for unpacking the OAP180 and verifying contents.
Lists items needed to complete OAP180 installation.
Step-by-step instructions for installing the OAP180.
Factors to consider regarding weather for OAP180 operation.
Guidelines for routing Ethernet cable for the OAP180.
Instructions for properly grounding the OAP180 unit.
Methods for mounting the OAP180.
Procedure for mounting OAP180 using a pole-mount bracket.
Procedure for mounting OAP180 using a wall-mount bracket.
Steps for connecting antennas and ground wire to OAP180.
Procedure for accurately aligning OAP180 antennas.
Guide to interpreting OAP180 status LEDs.
Recommendations for antenna gain settings for OAP180.
Next steps after installing the OAP180.
Highlights potential hazards that can damage equipment.
Alerts to potential hazards causing injury or death.
Radio, EMC, and Safety compliance for OAP180.
Exposure limits for occupational/controlled situations.
Compliance information for the United States.
Compliance information for Canada.
Compliance information for Japan.
To Next Page
