Meru Networks AP200 User Manual

Checking LED Activity
© 2010 Meru Networks, Inc. Installing AP200 67
Checking LED Activity
Access point status LEDs are provided on the Ethernet connector and on the face of
the AP200.
Ethernet Connector LEDs
After the AP200 is connected, the LEDs near the RJ-45 connector should light, as
shown in Figure 25.
Figure 25: RJ-45 LEDs
The green LED on the left blinks if any Ethernet activity is taking place. If there is
no Ethernet activity, the LED is off. The LED on the right is solid green if an Ethernet
link is present. If no Ethernet link is present or connectivity is lost, the LED is off.
AP200 Status LEDs
Four status LEDs on the face of the AP200 also light, as shown in Figure 26.
Ethernet activity
Link present
00129
AP200
RF2
RF1
STATUS
POWER
00113

Meru Networks AP200 Specifications

General

Brand	Meru Networks
Model	AP200
Category	Wireless Access Point
Language	English