Mesa/Boogie Lonestar Special User Manual

PAGE 4
Overview: (Continued)
Now let’s move on to understanding the individual controls and their interactive roles in shaping the sounds
you
want to hear.
you want to hear.you
FRONT
PANEL:
Controls
&
Features
INPUT:
This is the instrument
INPUT
jack. This jack feeds the preamp and since the
Lone Star Special
is a high gain amplifi er
and therefore very sensitive, always use a high quality shielded cable between the instrument and the amplifi er. This will prevent
unwanted noise and microphonic cable sounds.
FOOTSWITCH:
This 1/4 inch stereo jack is for connection of the Channel Select Footswitch. When the
FOOTSWITCH
is con-
nected here with the provided stereo cable, the Channels and SOLO feature may be controlled remotely.
INPUT
FT.SW
INPUT
FT.SW
GAIN
TREBLE
MID
BA
SS PRESENCE MASTER
SAMPLE #1. Sparkling Clean / Singing Lead
DRIVE
CH 1
FT SW
CH 2
THICK
THICKER
CLEAN
MAL
GAIN
TREBLE
MID
BA
SS PRESENCE MASTER
SAMPLE #2. Roots Clean / Old School Clip
NOR
Instant Gratification Demo Settings
STANDBY
ON
POWER
ON
DRIVE
CH 1
FT SW
CH 2
THICK
THICKER
CLEAN
MAL
NOR
INPUT
FT.SW
30 WATTS
5 WATTS
15
30 WA
TTS
5 WA
TTS
15
P
U R E
C
L A S S
A P
O W E R
OUTPUT
LOOP ON
SOLO
INPUT
FT.SW
STANDBY
ON
POWER
ON
P
U R E
C
L A S S
A P
O W E R
OUTPUT
LOOP ON
SOLO
30 WATTS
5 WATTS
15
30 WA
TTS
5 WATTS
15

Mesa/Boogie Lonestar Special Specifications

General

Type	Tube Amplifier
Channels	2
Preamp Tubes	5 x 12AX7
Power Amp Tubes	4 x EL84
Speaker	1 x 12" Celestion Custom 90
Effects Loop	Yes
Reverb	All-Tube, Long Spring
Controls	Gain, Treble, Mid, Bass, Presence, Reverb, Master
Speaker Outputs	1 x 4 Ohm
Wattage	5, 15, or 30 Watts (Switchable)
Footswitch	Included (Channel Switching, Solo, Reverb)