Need help?Do you have a question about the Mesa/Boogie Studio Preamp and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Tubes | 5 x 12AX7 |
| Reverb | Yes |
| Footswitch | Yes |
| Type | Tube |
| Controls | Treble, Middle, Bass, Presence |
| Inputs | 1 x 1/4" |
| Outputs | 2 x 1/4" |
| EQ | 3-band (Bass, Middle, Treble) |
| Footswitchable | Channel switching |
| Effects Loop | Yes |
| Dimensions | 19" |
Describes connecting the Preamp to traditional guitar amps via Recording Outputs or Effects Return.
Connects to mixing consoles via Recording Outputs or Main Outputs for direct injection recording.
Connects effects unit to EFFECTS SEND/RETURN, using LOW/LINE switch for desired level.
Connects Preamp Main Outputs to effect unit input, with effect unit controlling final level.
Volume adjusts gain/level; Master controls overall volume and Effects Send level.
Controls for gain, tone shaping, and special lead mode effects.
Adds midrange warmth, less dramatic than Treble/Bass controls.
Bright switches add high frequencies; EQ reshapes tone curve.
Built-in 3-spring reverb unit, designed to minimize noise and clipping.
Determines overall level to power amp or console for optimal signal-to-noise.
Controls AC power and standby mode for safe operation and noise management.
1/4" input for instrument; footswitch jack for mode switching.
Jacks for footswitches, stereo effects loop send/return.
Main and Recording Outputs for connecting to amps or consoles.
Connects Recording Outs to a guitar amp's input to add effects and tone shaping.
Line fuse protects unit; line cord details provided.
Describes common ground loops and methods to mitigate them.
Explains how the switch lifts circuit ground from chassis ground for quiet operation.
Settings for Blues, Rock, Metal, and Fusion styles.
Settings optimized for Shimmering Rhythm, Blues Lead, Crunch Chords.
Settings for Metal Lead with EQ, and Jazz Rhythm.
To Next Page