Need help?Do you have a question about the Mesa/Boogie Stiletto and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Channels | 2 |
| Preamp Tubes | 5 x 12AX7 |
| Reverb | No |
| Rectifier | Solid State |
| EQ | Bass, Mid, Treble |
| Inputs | 1 x 1/4" |
| Footswitch | Included (Channel Switching) |
| Effects Loop | Yes (Series) |
Details the three modes for Channel 1 (Fat Clean, Tite Clean, Crunch) and Channel 2 (Crunch, Tite Gain, Fluid Drive).
Explains the Power Select switch for 50W/100W operation and its impact on tone and headroom.
Describes the patented features for tuning power section response and feel.
Details the gain structure and tonal characteristics of Channel 1's Fat Clean, Tite Clean, and Crunch modes.
Explains the higher gain modes for Channel 2: Crunch, Tite Gain, and Fluid Drive.
Describes the Gain control's function and its three tonal regions for shaping sound character.
Details the Treble, Mid, and Bass controls, their placement in the signal path, and their tonal impact.
Explains the Presence control's high-frequency voicing and the Master control's role in overall level and effects loop.
Covers the Channel Select switch and Power Select (50W/100W) for tonal shaping and performance.
Details the Output Control for overall volume and the Solo Control for performance boosts.
Explains the function of the Bold/Spongy, Standby, and Power switches for tone and operation.
Describes the Slave output for external processing and speaker jacks for cabinet connection.
Details the external switch ports for channel/solo control and the series effects loop.
Explains how to use the FX Loop Return jack as an input for using the amp as a power amp.
Covers the Rectifier Select switches for choosing between diode and tube rectification for tonal variation.
Details the AC power receptacle and fuse replacement procedures for safety and operation.
Explains amplifier impedance handling and the effects of mismatching speaker loads.
Details how to calculate cabinet impedance and the methods for wiring speakers.
To Next Page