Need help?Do you have a question about the Mesa/Boogie Subway WD-800 and is the answer not in the manual?
General| Type | Bass Amplifier Head |
|---|---|
| Input Impedance | 1 MΩ |
| Power Output | 800 Watts |
| Preamp | Solid State |
| Inputs | 1 x 1/4" |
| Outputs | 1 x Speakon, 1 x 1/4" |
| EQ | 4-band EQ |
| Effects Loop | Series Effects Loop |
| Footswitch | Optional |
| Features | Mute switch |
| Cooling | Fan-cooled |
Essential safety precautions for operating and maintaining the amplifier.
High-level description of the front panel layout and its main sections.
High-level description of the rear panel connections and features.
Quick setup guide for achieving a good sound immediately.
Details on Input Jack, Mute, Active/Passive, Input Control & O/D LED, and High Pass Filter.
Explanation of Bass, Treble, Passive Mid, and Parametric Mid EQ controls.
Details on Master Volume, Power Amp Damping, and status LEDs.
Explanation of headphone out, effects loop, aux input, DI out, and USB power.
Steps to diagnose and resolve issues with no audio output from the amplifier.
Steps to diagnose and resolve issues with distorted audio output.
Diagnosing and resolving low hum, high hiss, and popping noise.
Troubleshooting protect LED activation and slow/no USB charging.
Recommended front panel settings for a crisp, clean fingerstyle tone.
Recommended front panel settings for a fat, full, and round tone.
Recommended front panel settings for a slaptastic playing style.
Recommended front panel settings for a tube grind and punch tone.
Blank templates for users to record their custom settings.
Contact information for technical support in the USA and Canada.
Information on contacting local distributors for international support.
To Next Page