WARNING
1
Failure to follow the warnings below can result in property damage, personal injury,
and in the worst case, death.
Do not start the oven with an empty chamber. There is a risk of fire and damage
to the machine.
Do not excessively bend the power cord or allow it to be crushed by heavy
objects. There is a risk of fire and electric shock.
Do not place any metallic object other than dental zirconia in the chamber. There
is a risk of fire and electric shock.
Do not keep flammable materials near the oven. There is a risk of fire.
Do not remove the casing of the appliance or repair it yourself. It runs on high
voltage and has a very dangerous capacitor, even after disconnecting the power
cord. There is a risk of electric shock. For assistance with any unit problem,
contact the seller or manufacturer.
_____ _____ _____ _____ _____ _____
_____ _____
Do not touch the oven or the power cord with wet hands. There is a risk of electric
shock.
Be careful with the surface of the oven. It may be hot.
Be sure to use the tool provided to remove the tray from the chamber after
sintering. There is a risk of burns.
Do not allow the oven to bump or pull excessively on the door. A deformation of
the unit may cause the leakage of electromagnetic waves which may damage
other equipment or the unit human body.
To prevent breakdowns, we recommend placing the oven in an area that is as little exposed
as possible to sources of dust (milling machines, sandblasters, plaster, dirt...).
To Next Page