Meta System T.30 User Manual

5
T.30 INSTALLATION MANUAL
KIT COMPOSITION
EN
A B
C
TELEMATIC CONTROL UNIT DETERGENT WIPE STRIPS
Power Supply: ..........................................................12Vdc (10V-24V)
Working temperature: .....................................from -30°C to +80°C
IP: ...............................................................................................................65
Application classi cation: ...........................engine compartment
TECHNICAL SPECIFICATIONSTOOLS
E F
ASSEMBLY DISASSEMBLY
WARNINGS
• ALL INSTALLATION OPERATIONS MUST BE CARRIED OUT WITH THE MOTOR OFF.
• Before starting installation, detect the battery location referring to the use and maintenance manual of the vehicle.
• Carefully assess the position of the device, according to the available space and length of the power cables.
• The device should be placed in accessible area only to service sta .
• Besides the double-sided tape, where required, we recommend using the supplied strips [C].
• Strictly comply with operations indicated in this manual.
• Installation sta are not authorised to remove warranty seals and/or access the inside of the product and accessories.
• Installation sta are not authorised to make modi cations and/or adjustments to the product and its accessories, any work
must be carried out exclusively at the manufacturer by authorised and quali ed sta .
• The manufacturer assumes no responsibility for damages caused to property and/or people, caused by the incorrect
installation of the product.
• CAUTION: Risk of explosion if the internal batteries are replaced with non-equivalent models, di erent to
that currently in the product.

Meta System T.30 Specifications

General

Brand	Meta System
Model	T.30
Category	Automobile Accessories
Language	English