To Next PageTo Next Page
Need help?Do you have a question about the Metabo HPT NT 65M2S and is the answer not in the manual?
General| Type | Finish Nailer |
|---|---|
| Magazine Capacity | 100 |
| Operating Pressure | 70-120 PSI |
| Weight | 4.2 lbs |
| Fastener Type | Finish Nails |
| Firing Mode | Sequential / Contact |
| Fastener Length | 1 in to 2.5 in |
Explains the meaning of DANGER, WARNING, CAUTION, NOTE signals used in the manual.
Details the SINGLE SEQUENTIAL and CONTACT ACTUATION mechanisms of the nailer.
Covers immediate safety actions like eye protection and avoiding pointing the tool at others.
Covers maintaining a clean work area and keeping bystanders away during operation.
Covers alertness, dress code, and avoiding loose clothing or jewelry near moving parts.
Instructions on avoiding accidental discharge, proper handling, and not forcing the tool.
Covers safe practices for tool servicing, repairs, and using correct parts.
Guidelines for safe compressed air supply, pressure limits, and avoiding reactive gases.
Covers general awareness, proper tool control, and avoiding hazards like recoil.
Details warnings for recoil, loading nails, depth adjustment, and operating near hidden objects.
Outlines duties for safe tool usage, maintenance, and ensuring operator training.
Identifies and labels the main parts of the nailer for user reference.
Explains the dual-mode switching device for selecting firing modes.
Lists operating pressure, dimensions, weight, and nail capacity.
Specifies compatible nail types and dimensions for the nailer.
Lists included and available accessories for the nailer.
Provides common uses and applications for the nailer.
Details safe and suitable working conditions and site preparation.
Guidelines for connecting and maintaining the air source, filters, and regulators.
Instructions for proper lubrication and operating the nailer in cold temperatures.
Steps to ensure the nailer functions correctly before starting work.
Procedures for setting the correct operating air pressure based on application.
Step-by-step guide to load nails into the nailer's magazine.
Explains and details the SINGLE SEQUENTIAL and CONTACT ACTUATION firing modes.
Procedures for adjusting the nail penetration depth using the adjuster.
Instructions for using the blow nozzle feature and changing the exhaust direction.
How to attach and use the optional nose cap for workpiece protection.
Steps for removing jammed nails and inspecting the nail magazine.
Guidelines for storing the tool and maintaining warning labels.
Emphasizes using trained personnel and approved parts for tool service.
A table to diagnose and resolve common nailer problems and their solutions.
