Metabo HPT NR 90AC5 User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la mort
ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o en la
muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
Model
Modèle
Modelo
NR 90AC5
Nailer
Cloueur
Clavador
000BookNR90AC5metabo.indb1000BookNR90AC5metabo.indb1 2018/05/2214:20:582018/05/2214:20:58

Metabo HPT NR 90AC5 Specifications

General

Brand	Metabo HPT
Model	NR 90AC5
Category	Nail Gun
Language	English

Summary

Metabo HPT Nailer Manual

Initial Hazard Warnings

Highlights critical DANGER notices for safe operation.

Safety and Operation Overview

Key Safety Information

General safety guidelines and precautions for nailer operation.

Signal Word Definitions

Safety Precautions

Work Area Safety and Eye Protection

Mandates eye protection and safe practices in the work area.

Safe Nailer Handling

Warns against misuse, unsafe handling, and accidental discharge.

Continued Safety Guidelines

Work Area and Personal Safety

Nailer Use and Care

Further Safety Instructions

Service, Air Source, and General Safety

Advanced Safety Considerations

Recoil and Fastener Safety

Hazard Avoidance in Operation

Operational Responsibilities

Employer, Owner, and Operator Duties

Outlines the responsibilities of all parties involved in nailer operation and maintenance.

Nailer Operation Overview

Nailing Operation Switching

Pre-Operation Testing

Nailer Test Sequence

Operation Mode Verification

Air Pressure Adjustment

Guides on setting and adjusting the air pressure for optimal performance.

Loading and Unloading Nails

Nail Loading Procedure

Step-by-step instructions for loading nails into the magazine.

Nailer Usage Guidelines

General Operation and Safety Rules

Essential safety and operational rules for using the nailer.

Unloaded Operation Safety

Methods of Nailer Operation

Switching Actuation Modes

Continuous Nailer Operation

Contact Actuation (Push Lever Fire)

Instructions for continuous firing using the push lever.

Nail Depth and Exhaust Adjustment

Adjusting Nailing Depth

How to adjust the nail depth setting for proper penetration.

Maintenance and Inspection Procedures

Clearing Nail Jams

Service and Repair Information

Repair and Modification Policies

States that repairs must be done by authorized personnel using specific parts.

Operator Troubleshooting Guide

Common Problem Resolution

A guide to diagnose and fix common nailer operational issues.