Metabo HPT NT65MA4 User Manual

Model
Modèle
Modelo
NT 65MA4 (S)
Finish Nailer
Cloueur de fi nition
Clavadora de acabado
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la mort
ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o
en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
000BookNT65MA4(S)USmetabo.indb1000BookNT65MA4(S)USmetabo.indb1 2018/02/0714:38:342018/02/0714:38:34

Metabo HPT NT65MA4 Specifications

General

Type	Finish Nailer
Nail Size	16 gauge
Operating Pressure	70-120 PSI
Weight	4.2 lbs
Depth Adjustment	Yes
Firing Mode	Contact or Sequential
Power Source	Pneumatic
Tool-Free Jam Release	Yes
Magazine Capacity	100 nails
Nail Type	Finish

Summary

Safety Information and Definitions

Signal Words and Nailing Mechanism

Explains signal words and how the nailer operates.

General Safety and Work Area

Eye Protection and Area Safety

Mandatory eye protection and safe work area practices for nailer operation.

Safe Trigger and Handling Practices

Prevents accidental discharge and ensures proper handling.

Personal Safety and Nailer Operation

Personal Safety and Attire Guidelines

Guidelines for alert operation, proper dress, and avoiding hazards.

Safe Nailer Usage Rules

Rules for safe nailer usage, including avoiding unintentional starts.

Pre-Operation Checks

Working Environment and Air Supply

Ensures safe environment and proper air supply setup.

Lubrication and Cold Weather Care

Proper lubrication and cold weather operating procedures.

Nailer Testing and Loading

Nailer Testing Procedures

Step-by-step guide to test nailer functionality before use.

Loading Nails Safely

Instructions for safely loading nails into the magazine.

Nailer Operation Modes

Single Sequential Actuation

Operation method for precise fastener placement, trigger-first.

Contact Actuation Operation

Operation method for rapid fastening using push lever.

Adjustments and Accessories

Adjusting Nailing Depth

How to adjust the nailer's depth setting for desired penetration.

Blow Nozzle and Exhaust Direction

Using the blow nozzle and changing exhaust vent direction.

Using the Nose Cap

Attaching and using the accessory nose cap for workpiece protection.

Maintenance and Troubleshooting

Routine Maintenance and Inspection

Regular checks, cleaning, and lubrication for the nailer.

Clearing Jams and Magazine Care

Methods for clearing jammed nails and maintaining the magazine.

Storage and Warning Labels

Proper storage and importance of warning labels.

Service and Repair Guidelines

Information on authorized service personnel and parts.

Operator Troubleshooting Guide

Common nailer problems, checks, and their solutions.