Metabo HPT NT 1850DF User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner
la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n'ayant pas étutdié le manuel utiliser l'outil.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias
o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el clavador.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Model
Modèle
Modelo
NT 1850DF
Cordless Brad Nailer
Cloueuse avec clous à tête perdue sans fi l
Clavadora de brads a batería
00BookNT1850DFNA.indb100BookNT1850DFNA.indb1 2022/08/2919:07:402022/08/2919:07:40

Metabo HPT NT 1850DF Specifications

General

Brand	Metabo HPT
Model	NT 1850DF
Category	Nail Gun
Language	English

Summary

Introduction and Safety

Important Information and Signal Words

General guidance, hazard definitions (DANGER, WARNING, CAUTION), and tool operation explanation.

General Power Tool Safety

Covers work area, electrical, and personal safety rules for power tools.

Nailer Operation and Battery Safety

Critical warnings, instructions for safe nailer handling, and battery/charger safety.

Tool Use, Care, and Storage Guidelines

Covers temperature, storage, handling, checks, and general tool use precautions.

Operation

Parts, Specifications, and Accessories

Identifies parts, lists specifications, and details accessories for the nailer.

Battery Handling and Charging

Step-by-step guide on battery installation, removal, charging, and performance tips.

Nailer Controls and Operation Modes

Explains operating panel, battery status, testing, and different nailing modes.

Nailing Procedures, Adjustments, and Jam Clearing

Covers loading nails, operation methods, depth adjustment, and clearing jams.

Maintenance and Service

Maintenance and Inspection Procedures

Procedures for inspecting the magazine, cleaning, and proper storage.

Service, Repairs, and Troubleshooting

Information on who should service the tool, genuine parts, and troubleshooting common issues.