Metabo HPT NV 65AH2 User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
Model
Modèle
Modelo
NV 65AH2
Nailer
Cloueur
Clavador
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la
mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du
manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o
en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
000BookNV65AH2USmetabo.indb1000BookNV65AH2USmetabo.indb1 2018/03/1916:02:242018/03/1916:02:24

Metabo HPT NV 65AH2 Specifications

General

Brand	Metabo HPT
Model	NV 65AH2
Category	Nail Gun
Language	English

Summary

Nailer Safety Guidelines

General Nailer Safety Instructions

Covers essential safety rules for nailer operation, including eye protection and gas usage.

Work Area and Personal Safety Guidelines

Storage, Maintenance, and Air Source Safety

Details safe practices for storing, maintaining the nailer, and managing air supply.

Advanced Nailing Safety Procedures

Responsibilities for Safe Nailer Use

Outlines the duties of employers, owners, and operators to ensure safe nailer usage.

Nailer Operation Procedures

Nailer Specifications and Nail Selection

Compressed Air Supply Requirements

Specifies the necessary conditions and safety for the compressed air supply.

Nailer Testing Procedures

Step-by-step guide to test the nailer's functionality before use.

Adjusting Air Pressure

Details how to properly adjust and set the air pressure for the nailer.

Loading Nails into the Magazine

Provides a detailed guide on how to load nails into the nailer's magazine.

Nailer Operating Modes

Safe Operation Guidelines

Intermittent Nailing (Trigger Fire)

Continuous Nailing (Push Lever Fire)

Adjusting Nailing Depth

Guides on how to adjust the nailer's depth setting for optimal fastener penetration.

Nailer Maintenance and Service

Maintenance and Inspection Overview

Service and Repair Information

Operator Troubleshooting Guide

A guide to diagnose and resolve common nailer problems and operational issues.