To Next PageTo Next Page
Need help?Do you have a question about the Metabo OFE 738 and is the answer not in the manual?
General| Input power | 710 W |
|---|---|
| Output power | 430 W |
| Power source | AC |
| AC input voltage | - V |
| Routing stroke | 50 mm |
| Collet capacity | 8 (5/16\ |
| Idle speed (max) | 27000 RPM |
| Idle speed (min) | 10000 RPM |
| Spindle lock | Yes |
| Product color | Green, Silver |
Weight and Dimensions| Weight | 3000 g |
|---|
Read all safety warnings and instructions to prevent injury.
Save all safety information and instructions for future reference.
Describes the correct use and intended applications of the OFE 738 router.
Electrical tools must only be repaired by qualified electricians.
Details typical A-weighted noise levels and advises wearing ear protection.
Specifies the total vibration value and emission according to EN 60745.
Instructions for safe handling, preventing dust entry, and avoiding electric shock.
Use extraction, wear goggles, disconnect power before maintenance.
Requirement to install an RCD with a maximum trip current of 30 mA upstream.
Instructions on reducing dust exposure and potential health risks from particles.
Instructions for operating the on/off switch and preventing unintentional starts.
Details on setting the speed electronically and identifies idling speeds.
Instructions for setting milling depth and cooling the motor when working with hardwood.
Instructions for fitting high-quality router bits suitable for high speed.
Steps to insert parallel guide, scale, and tighten screws for precise guidance.
Attach circle guide pin for cutting circular grooves, round openings, and rounding edges.
Angular guide facilitates optimum router guidance on workpiece edges.
Clean and lubricate shafts, replace carbon brushes by manufacturer.
Details power ratings, weight, speed range, collet size, and certifications.
