Metabo SBE 1010 PLUS Original Instructions

12
ENGLISH
ENG
1 Declaration of Conformity
2 Specified Conditions of Use
3 General Safety Information
4 Special Safety Information
5Overview
6 Special Product Features
7Start of Operation
7.1 Side handle installation
8Use
8.1 Depth stop setting
8.2 Switching on/off
8.3 Speed preselection
8.4 Gear selection
8.5 Changing between drilling/impact
drilling
8.6 Selection of direction of rotation
8.7 Tool change with Futuro Top
keyless chuck
8.8 Tool change with Futuro Plus
keyless chuck
8.9 Tool change with geared chuck
8.10 Contact mode
8.11 Impulse mode
8.12 Torque limiter
8.13 Removing the drill chuck
9 Tips and Tricks
10 Maintenance
11 Trouble Shooting
12 Accessories
13 Repairs
14 Protection of the Environment
15 Technical Specifications
We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 2.
The machine is suitable for non-impact drilling into
metal, wood, plastic and similar materials and for
impact drilling into concrete, stone and other such
materials. Furthermore the machine is suitable for
tapping and screw driving (not SB 660).
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
WARNING – Reading the operating
instructions will reduce the risk
of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep
all enclosed documentation for future reference,
and pass on your power tool only together with this
documentation.
For your own protection and the
protection of your power tool, observe
the passages marked by this symbol!
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
Use auxiliary handle, if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord.
Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the
switch when the plug is removed from the mains
Original instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Declaration of Conformity
2 Specified Conditions of Use
3 General Safety Information
4 Special Safety Information
17026951_0709 SB_Bauk.book Seite 12 Montag, 13. Juli 2009 1:54 13

Metabo SBE 1010 PLUS Specifications

General

Brand	Metabo
Model	SBE 1010 PLUS
Category	Drill
Language	English