Need help?Do you have a question about the Metabo STEB 65 Quick and is the answer not in the manual?
General| Cutting Depth in Wood | 65 mm |
|---|---|
| Weight | 2.5 kg |
| Type | Jigsaw |
| Cutting depth in NF metal | 10 mm |
| Cable length | 2.5 m |
| Power Source | Corded Electric |
| Stroke rate at no load | 0-5000 strokes/min |
| Strokes | 0-5000 strokes/min |
| No-load speed | 0-5000 strokes/min |
| Cutting depth | 65 mm |
The machine's intended purpose for sawing various materials.
Comprehensive safety guidelines including work area, electrical, personal safety, and use/care.
Have the power tool serviced by qualified personnel using identical replacement parts.
Measures to reduce exposure to hazardous particles generated during operation.
Explains various symbols found on the tool, including electrical and measurement units.
Lists and briefly describes the main parts and accessories of the jigsaw.
Checks before plugging in, RCD installation, and fitting accessories for operation.
How to set the pendulum motion for different cutting speeds and materials.
Adjusting speed and using the on/off switch for continuous operation.
Procedures for cleaning and maintaining the power tool.
Technique for starting cuts in thin materials without pre-drilling.
Instructions for fitting the circular-cutting and parallel guide accessory.
Information on noise and vibration emission levels of the tool.
To Next Page
