To Next PageTo Next Page
Need help?Do you have a question about the Metabo TKHS 315 M and is the answer not in the manual?
Defines the intended purpose and limitations of the machine's operation.
Provides essential safety guidelines to minimize risks during operation.
Explains the meaning of various symbols found on the machine's nameplate.
Details the function and importance of key safety features like the riving knife and blade guard.
Explains the operation of the main power switch for starting and stopping the machine.
Details how to adjust the angle of the saw blade for bevel cuts.
Describes the two types of fences (mitre and rip) and their adjustment for different cuts.
Specific instructions for using the rip fence for ripping operations.
Instructions for installing the main power switch onto the machine.
Steps for attaching the dust collection system components to the machine.
Detailed instructions for assembling the mitre fence for cross-cutting.
Procedures for correctly aligning and adjusting the rip fence for parallel cuts.
Instructions for mounting the wheels onto the machine stand for mobility.
Steps for attaching the table extension panel and its supporting struts.
How to install the supports for the table extension in a fixed position.
Instructions for fitting the transport handles to the machine.
Steps to install holders for accessories like the push stick and handle.
Guidance on checking and correcting saw blade rotation direction for safety.
Requirements and procedures for using the dust collector for efficient chip removal.
How to set the desired cutting depth for the saw blade based on workpiece thickness.
Procedures for adjusting the saw blade's angle for bevel cuts.
Instructions for performing rip cuts using the rip fence.
How to make cross and mitre cuts using the mitre fence.
Step-by-step guide for safely replacing the saw blade.
Instructions on how to properly align the riving knife with the saw blade.
How to clean and maintain the saw blade height adjustment system.
General
