To Next PageTo Next Page
Need help?Do you have a question about the Metabo TKHS 315 C and is the answer not in the manual?
General| Blade Diameter | 315 mm |
|---|---|
| Max Cutting Height at 90° | 85 mm |
| Max Cutting Height at 45° | 60 mm |
| Table Size | 800 x 550 mm |
| Saw Blade | 315 x 30 mm |
| Motor | Induction motor |
| Mains Voltage | 220 - 240 V |
| Cutting Depth at 90° | 85 mm |
| Cutting Depth at 45° | 60 mm |
| Swivel Range of Saw Blade | 0° - 45° |
Defines the intended use and limitations of the machine.
Provides essential general safety guidelines for operating the tool.
Explains various symbols and their meanings found on the machine.
Details the safety features and their functions.
Details how to safely connect the machine to the electrical power supply.
Instructions for positioning and stabilizing the machine on a level surface.
Instructions on connecting and using a dust collection system.
Steps for setting the desired depth of cut for the saw blade.
Guide on how to adjust the saw blade's angle from 0° to 45°.
Procedures for using the rip fence for straight cuts.
Instructions for making angled cuts using the mitre fence.
Step-by-step instructions for safely replacing the saw blade.
Procedures for checking and adjusting the riving knife alignment.
How to clean and maintain the saw blade height adjustment system.
Recommendations for safe storage of the machine.
