Metabo KGS 254 User Manual

115 173 5556 / 0609 - 1.0
KGS 216
KGS 254
Orginalbetriebsanleitung Kapp- und Gehrungssäge . . . . . 3
Original operating instructions for the crosscut 
and mitre saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Instructions d’utilisation originales Scie oscillatoire 
et d’onglet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Manuale d’uso originale Sega troncatrice 
e per tagli obliqui . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
0014_1v4IVZ.fm

Metabo KGS 254 Specifications

General

Blade Diameter	254 mm
Turntable Adjustment Range (Left)	47 °
Turntable Adjustment Range (Right)	47 °
Saw Blade Tilt Range (Left)	47 °
Saw Blade Bore	30 mm

Summary

Parts Identification

Important Safety and Usage Information

Safety Precautions

Specified Conditions of Use

General Safety Instructions

Provides overarching safety rules and precautions for operating the machine.

Integrated Safety Devices

Describes the function and importance of built-in safety features like blade guards.

Installation and Transport Guide

Machine Components and Controls

Control Switches and Adjustments

Bevel Tilt and Rotating Table Operation

Initial Setup and Operation

Mains Power Connection

Operating Procedures

Standard Cross Cut Procedure

Step-by-step guide for performing standard cross cuts on the workpiece.

Mitre Cut Technique

Procedure for making angled cuts across the width of the workpiece.

Bevel Cut Technique

Instructions for making angled cuts along the height of the workpiece.

Compound Mitre Cut Procedure

Guide for performing cuts that combine mitre and bevel angles.

Grooving Operation Guide

Care and Maintenance

Saw Blade Replacement

Detailed steps for safely removing and installing saw blades, including precautions.

Carbon Brush Maintenance

Routine Maintenance Checks

Repair Information

Troubleshooting Common Issues

Technical Specifications