To Next PageTo Next Page
Need help?Do you have a question about the Metabo KGS 301 and is the answer not in the manual?
Describes the front view of the mitre saw and its components.
Details the rear view of the mitre saw and its components.
Explains symbols displayed directly on the mitre saw for user safety.
Clarifies symbols used within the instruction manual for better understanding.
Details the safety features integrated into the mitre saw for user protection.
Provides instructions for safely connecting the mitre saw to the mains power supply.
Explains the procedure for performing standard cross cuts with the mitre saw.
Details how to perform mitre cuts at various angles using the rotating table.
Guides the user on making bevel cuts by tilting the sawhead to specific angles.
Explains how to perform cuts that combine both mitre and bevel angles.
Describes how to use the track arm feature for cutting wider workpieces.
Instructions on creating and using a custom auxiliary fence for small cutoffs.
Step-by-step guide on safely removing and installing saw blades.
Details the process for replacing the kerf plate for proper saw operation.
Instructions on how to adjust the mitre scale for accurate angle readings.
Explains how to set the tilt stops for precise vertical and 45-degree bevel cuts.
General maintenance checks and procedures to ensure the saw's functionality.
Lists available saw blades with their specifications and stock numbers.
General