Need help?Do you have a question about the Metabo ELEKTRA BECKUM KGT 501 and is the answer not in the manual?
Detailed illustration of the machine's standard delivery components.
Essential instructions and general safety advice for safe operation.
Defines the intended operating modes and limitations of the machine.
Details on machine safety features and identification symbols.
Highlights the unique design and capabilities of the machine.
Step-by-step guidance for setting up and moving the machine.
Instructions for safely connecting the machine to the electrical supply.
Identifies and explains the main controls and switches on the machine.
Setup and safety guidelines for using the crosscut and mitre saw function.
Detailed instructions for performing mitre, bevel, and compound mitre cuts.
Specific steps for making accurate mitre cuts on workpieces.
Procedures for executing precise bevel cuts with the machine.
Guidance on performing combined mitre and bevel cuts.
Safety precautions and devices specific to the table saw configuration.
Steps to correctly configure the machine for table saw operations.
Instructions for performing standard cross cuts and bevel cuts in table saw mode.
Detailed steps for making straight cuts on the saw table.
How to perform bevel cuts when the machine is in table saw mode.
Step-by-step guide for safely replacing the saw blade.
Checks and procedures for maintaining optimal drive belt tension.
Ensuring the saw blade is precisely 90° to the fence.
Calibrating the machine's adjustable tilt stops for 90° and 45°.
Positioning the saw blade centrally in the kerf plate slot.
Aligning the rotating table's locking pin to 90° and 45° positions.
Checking and readjusting the machine's scale markings for accuracy.
Recommendations for safe and proper storage of the machine.
Tasks to perform for regular upkeep and preventative maintenance.
Diagnosing and resolving issues like motor faults or loss of performance.
List of compatible saw blades with specifications and stock numbers.
To Next Page
General