Need help?Do you have a question about the Metabo KGT 300 and is the answer not in the manual?
General| Input power | 1800 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 315 mm |
| Saw blade included | Yes |
| Idle speed (max) | 3400 RPM |
| Bevel setting (left) | 48 ° |
| Miter setting (left) | 50 ° |
| Bevel setting (right) | 45 ° |
| Miter setting (right) | 60 ° |
| Cutting capacity 0° | 170 x 100 mm |
| Cutting capacity 45° miter | 67 x 62 mm |
| Dust extraction | - |
Weight and Dimensions| Weight | 21000 g |
|---|
Crucial safety and usage instructions to be followed before operating the machine.
Defines the intended applications and limitations for the saw's operation.
Provides fundamental safety rules and precautions for operating the tool safely.
Step-by-step guide for setting up the machine after unpacking.
Procedures for safely securing and moving the machine for transport.
Essential safety and technical requirements for connecting the machine to electrical power.
Identifies safety features like blade guard, riving knife, and push stick for table saw use.
Guidance on operating the machine for various cuts in table saw mode.
Detailed, step-by-step guide for safely replacing the saw blade.
A guide to diagnosing and resolving common operational problems and malfunctions.
Comprehensive data including electrical, dimensional, and performance specifications.
To Next Page
