EasyManua.ls Logo

Metabo KGT 501 - User Manual

Metabo KGT 501
59 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
115 167 6282 / 5109 - 4.0
KGT 501
Originalbetriebsanleitung. . . . . . . . . . . . . . .3
Original operating instructions . . . . . . . . . .17
Instructions d’utilisation originales . . . . . . .30
Origineel gebruikaanwijzing. . . . . . . . . . . .44
A0196_40IVZ.fm

Table of Contents

Questions and Answers

  • P
    Patricia KimAug 11, 2025
    What to do if my Metabo Saw motor does not run?
    • H
      Heather MorrisAug 11, 2025
      If the motor of your Metabo Saw doesn't start, here are a few things to check: * **No mains voltage:** Ensure that the cables, plug, outlet, and mains fuse are all working correctly. * **Undervoltage relay tripped:** If there was a power failure, try switching the saw on again. * **Motor protection tripped:** Allow the motor to cool down for about 10 minutes, and then try starting it again. * **Motor locked:** Check if the saw blade is blocked. If so, remove the obstruction and let the motor cool down if needed before restarting.
  • A
    Anne TurnerAug 19, 2025
    Why is my Metabo KGT 501 Saw losing cutting performance?
    • H
      Holly VaughnAug 19, 2025
      If your Metabo Saw is not cutting as well as it used to, it could be due to a blunt saw blade. Look for possible tempering marks on the blade body. If the blade is blunt, replace it.
  • V
    Victoria WilliamsAug 31, 2025
    What to do if Metabo Saw has obstruction by chips?
    • J
      Joel MartinezAug 31, 2025
      If your Metabo Saw is experiencing obstruction by chips, consider the following: * **No dust collector hooked up:** Connect a dust collector to the saw. * Remove any accumulated sawdust and chips using a vacuum or brush.

Metabo KGT 501 Specifications

General IconGeneral
BrandMetabo
ModelKGT 501
CategorySaw
LanguageEnglish

Related product manuals