To Next PageTo Next Page
Need help?Do you have a question about the Metabo KGT 305 M and is the answer not in the manual?
General| Idle speed | 3700 RPM |
|---|---|
| Cutting speed | 60 m/s |
| Uncertainty K | 3 dB |
| Sound power level | 98 dB |
| Cutting depth (45º) | 70 mm |
| Cutting depth (90º) | 102 mm |
| Sound pressure level | 95 dB |
| Maximum cutting height | 50 mm |
| Rotational speed (max) | 2750 RPM |
| Cutting width 90° x 45° | 150 x 100 mm |
| Input power | 1600 W |
| Number of teeth | 56 |
| Saw blade included | Yes |
Weight and Dimensions| Depth | 600 mm |
|---|---|
| Width | 658 mm |
| Height | 460 mm |
| Weight | 22000 g |
| Cord length | 2.8 m |
| Table depth | 261 mm |
| Table width | 462 mm |
| Blade diameter | 305 mm |
Emphasizes staying alert, using PPE, preventing unintentional starting, and proper dressing.
Covers electrical safety, risks from moving parts, kickback, drawing-in hazards, and workpiece handling.
Covers hazards from modifications, defects, noise, blockages, symbols, and nameplate details.
Details on safety devices and initial setup procedures for chop and mitre saw operation.
Guides for performing straight, mitre, inclined, and double mitre cuts.
Explains safety devices for table saw mode: blade guard, splitting wedge, side protection, push stick.
Instructions for performing cuts when using the saw as a table saw.
Detailed steps for safely changing the saw blade, including precautions.
