To Next PageTo Next Page
Need help?Do you have a question about the Metabo KGSV 72 Xact and is the answer not in the manual?
General| Bevel type | - |
|---|---|
| Sliding rails | Yes |
| Idle speed (max) | 6300 RPM |
| Idle speed (min) | 2200 RPM |
| Bevel setting (left) | 47 ° |
| Cutting depth (90º) | 72 mm |
| Cutting width (90°) | 305 mm |
| Miter setting (right) | 50 ° |
| Input power | 1800 W |
| Cable length | 3 m |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Blade diameter | 216 mm |
| Number of blade teeth | 40 |
Weight and Dimensions| Depth | 660 mm |
|---|---|
| Width | 540 mm |
| Height | 415 mm |
| Weight | 16100 g |
Guidelines for maintaining a safe work environment and ensuring electrical safety during operation.
Specific safety advice for mitre saws, including environmental considerations and general hazards.
Details on specific risks like crushing, drawing-in, and dust inhalation, and required personal protective equipment.
Addressing risks like kickback, jamming, and managing dust exposure for health and safety.
Detailed steps for safely replacing the saw blade, including precautions.
Identifies common problems like trimming function issues and saw vibration, with solutions.
