To Next PageTo Next Page
Need help?Do you have a question about the Metabo TS 216 and is the answer not in the manual?
General| Input power | 1500 W |
|---|---|
| Cable length | 3 m |
| Output power | 900 W |
| Diamond disc | - |
| Idle speed (max) | 5000 RPM |
| Sound power level | 102 dB |
| Cutting depth (45º) | 43 mm |
| Cutting depth (90º) | 63 mm |
| Sound pressure level | 89 dB |
| Sound level uncertainty | 3 dB |
| Saw blade included | Yes |
| Product color | Black, Green, Red, Silver |
Weight and Dimensions| Depth | 730 mm |
|---|---|
| Width | 670 mm |
| Height | 355 mm |
| Weight | 28500 g |
| Blade diameter | 216 mm |
| Blade thickness | 30 mm |
| Height adjustment range | 355 - 850 mm |
General guidelines for maintaining a safe and clean work environment.
Precautions for safe use of electrical power tools and connections.
Advice on staying alert, using PPE, and preventing accidental starts.
Proper operation, storage, and maintenance to prevent hazards.
Recommendations for professional servicing and understanding hazard symbols.
Importance of functional guards, splitting wedge, blade guard, and push stick.
Risks from wood dust and measures to reduce exposure.
Dangers of modification, unapproved parts, and tool defects.
Explanation of symbols and information found on the machine's nameplate.
Identification and numbering of various parts and controls on the machine.
Instructions for stable setup and maintaining balance during installation.
Steps for installing the tool on a table or with its machine stand.
Procedure to verify splitting wedge alignment and install blade guard.
How to adjust the table insert for proper alignment with the table surface.
Steps to adjust splitting wedge and install blade guard before operation.
Connecting the tool to the power source safely and correctly.
Essential checks and safety measures before operating the tool.
Recommended PPE and guidance on maintaining a safe operating stance.
Common errors to avoid to prevent kickback and other hazards.
Specifications and importance of using a suitable dust extraction system.
Procedure to set the saw blade's cutting depth relative to the workpiece.
How to set and lock the saw blade's angle of inclination.
Steps for aligning the ripping fence for accurate width settings.
Aligning fence pointer and setting the mitre fence for angled cuts.
How to extend the table side and length supports for workpieces.
Steps for performing straight and angled cuts with the saw.
Steps to safely prepare the machine for transport and move it.
Detailed steps for safely replacing the saw blade.
How to set and lock the saw blade's angle of inclination stop.
Instructions for storing the machine safely and performing routine cleaning.
Regular checks of components and adjustments for smooth operation.
Tips for efficient cutting and common issues with solutions.
List of recommended accessories and advice on safe repairs.
Guidelines for environmentally responsible disposal and detailed technical specifications.
