To Next PageTo Next Page
Need help?Do you have a question about the Metabo KS 216 Lasercut and is the answer not in the manual?
General| Input power | 1350 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 216 mm |
| Dust bag included | No |
| Saw blade included | Yes |
| Idle speed (max) | 5000 RPM |
| Bevel setting (left) | 45 ° |
| Miter setting (left) | 47 ° |
| Bevel setting (right) | 0 ° |
| Cutting capacity 0° | 120 x 60 mm |
| Cutting capacity 45° miter | 80 x 45 mm |
| Dust extraction | - |
Weight and Dimensions| Weight | 9000 g |
|---|
Defines the intended use and limitations for safe operation of the saw.
Provides essential safety rules to prevent injury and material damage during operation.
Describes the function and importance of built-in safety features for user protection.
Details on connecting the saw to the power source, including safety precautions.
Step-by-step guide for performing standard cross cuts on the workpiece.
Instructions for making angled cuts using the rotating table.
Procedure for making angled cuts by tilting the sawhead.
