How to troubleshoot a Metallkraft RBM machine that doesn't work?
If your Metallkraft Industrial Equipment machine isn't working, there are a couple of things to check. First, examine the electrical connection to ensure it is properly connected. Second, verify that the power switch is in the ON position. If these steps don't resolve the issue, contact the service.
What to do if having problems bending thick sheet metal using Metallkraft Industrial Equipment?
If you're encountering issues bending thick sheet metal with your Metallkraft Industrial Equipment, consider these points: Ensure the sheet thickness is within the allowable limits specified for the machine. Also, make sure that you are using only flat workpieces.
General| Model | RBM Series |
|---|---|
| Type | Radial Drilling Machine |
| Column Diameter | Varies by model |
| Arm Rotation | 360 degrees |
| Motor Power | Varies by model |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Weight | Varies by model |
To Next Page
