226
Enter Setup
Metapace S-22 Hardware Manual
Electrical Characteristics
Battery Rechargeable Li-ion battery – 3.7 V, 800 mAh
Power Adaptor
Input AC 100~240 V, 50/60 Hz
Output DC 5V, 2A (Cradle)
DC 5V, 0.5A (Battery Charger)
Operating Temperature 0 °C to 40 °C
Environmental Characteristics
Temperature Operating
Storage
0 °C to 50 °C
-20 °C to 60 °C
Humidity
(Non-condensing)
Operating
Storage
10% to 90%
5% to 95%
Resistance
Impact Resistance 1.2 m, 5 drops per 6 sides
Ingress Protection IP 30
Electrostatic Discharge ± 15 kV air discharge, ± 8 kV contact discharge
Programming Support
Configuration Setup barcodes or host serial commands.
Software Windows
®
-based Metapace.exe
Firmware upgradeable Download firmware updates via the download utility
Accessories (√ means “supported”)
Rechargeable Li-ion Battery
√
Battery Charger
√
Cradle
√
USB Cable
√
RS-232 Cable
√
Keyboard Wedge Cable
√
Note: The cradle is not only an Auto-Sense stand capable of charging the scanner, but
specifically designed for the scanner to communicate with a host computer
wirelessly.
To Next Page
