Metasys UNT111-1 User Manual

UNT Controller—Unitary Controller (UNT) 9
Table 3 explains the blank attribute fields. The Operator Workstation
User’s Manual (FAN 634) describes the general procedures for
entering and modifying data.
Table 3: Blank UNT Object Attributes
Attribute Description Entry Values . . .
Object Name
Identifies the object
(i.e., UNT1). The object
name cannot be duplicated
in the system.
1 to 8 alphanumeric
characters
Expanded ID
Further identifies the object
(i.e., Garage Level Heater)
0 to 24 alphanumeric
characters
(optional)
9. On the Item menu, select Save to save the new UNT object and add
the object to the NCM database.
10. Upload the NCM to make an archive copy of the new object. Refer to
the Operator Workstation User’s Manual (FAN 634), Uploading from
the NCM.
To define a UNT control device in Companion, refer to the Metasys
Companion Technical Manual (FAN 628.1).
Defining a UNT
Control Device
in Companion
Software

Metasys UNT111-1 Specifications

General

Brand	Metasys
Model	UNT111-1
Category	Controller
Language	English