To Next PageTo Next Page
Need help?Do you have a question about the Metasys TC-9100 Series and is the answer not in the manual?
General| Model | TC-9100 Series |
|---|---|
| Communication Protocols | BACnet MS/TP, N2 |
| Application | HVAC systems control and monitoring |
| Input/Output Points | Configurable, varies by model |
| Input Voltage | 24 VAC |
| Power Supply | 24 VAC |
| Operating Temperature | -40°F to 158°F (-40°C to 70°C) |
| Storage Temperature | -40 to 176°F (-40 to 80°C) |
| Memory | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Mounting | DIN rail or surface mount |
| Relative Humidity | 10% to 95% non-condensing |
Describes the two models of the TC-9100 Universal Controller and their terminal options.
Details the operating modes: Standalone, Alternate, Supervisory, Low Limit, Summer/Winter, Auto-dial.
Details configuration parameters for analog inputs, including range, offset, and filter settings.
Explains configuration of digital inputs, including logic modes and contact action.
Details configuration for seven output modules, including analog and digital types like PAT and DAT.
Describes six programmable modules and their configuration using algorithms 1-13.
Configures the low limit module for temperature protection, including set point and differential.
