Need help?Do you have a question about the Metcal MX-500P and is the answer not in the manual?
General| Power | 80 W |
|---|---|
| Input Voltage | 100 - 240 VAC |
| Input Line Frequency | 50/60 Hz |
| Standby Mode | Yes |
| Temperature Range | 200°C - 480°C (392°F - 896°F) |
| Heating Technology | SmartHeat |
Details the SmartHeat® technology which self-regulates tip temperature without external calibration.
Explains features like auto shut-off, time-out function, and override switch for power management.
Describes the construction of soldering and rework cartridges and factors for selection.
Guides on selecting appropriate tip geometry for maximizing contact area and access.
Advises on selecting lower temperature series for tasks to minimize thermal damage.
Provides a chart linking applications to temperature series (X=Series).
Step-by-step instructions for connecting hand-pieces and powering on the unit.
Procedures for safely removing and installing new tip cartridges.
Details on how to operate the MX-PTZ and TALON hand-pieces for soldering.
Instructions on how to properly align the tips of the MX-PTZ hand-piece.
Tips for cleaning, tinning, and using appropriate temperatures to prolong cartridge life.
Explains causes of tip detinning and how to prevent it through proper care.
Guidance on selecting cartridges for multi-lead packages and SMT removal.
To Next Page
