21
meteo – SP89 Manual
button for more than 3 seconds to stop the alarm signal.
Snooze function:
When the time is up to the alarm, touch and release the “ ” touch button, the alarm signal stops, and enter the
snooze timing mode.
At the end of the snooze timer, it will ring again (can repeat snooze)
In snooze timing mode, press any buttons except the “ ” touch button or touch hold down the “ ” touch button
for more than 3 seconds to exit the snooze mode
Temperature | Humidity Readings | History | Trend
Press and release the “ ” button to view High | Low temperature and humidity and feels like temperature, dew point
temperature, heat index, wind chill index.
In the view High | Low temperature or humidity mode, press and release the “ ” button to switch to view the records of
other channels.
Note: feels like temperature, dew point temperature, heat index and wind chill index is related to the value detected by
the multi-combined wireless remote sensor.
In the mode of viewing temperature | Humidity history, press and hold the “ ” button for 3 seconds to clear all history of
indoor | outdoor remote temperature | Humidity.
Note: Indoor | outdoor remote temperature | Humidity reading will reset to current value.
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the view
mode.
Indoor | outdoor remote temperature | humidity will have trend change tips
: Temperature / humidity is rising.
: Temperature/humidity drops.
No display: temperature/humidity remains unchanged.
Wind Readings | History
In the main display interface, press and hold the “ ” button for 3 seconds to convert the display to wind direction or
display as 1 hour top speed
Note: WIND SPEED: average speed over the past 30 seconds
1HR TOP SPEED: Highest speed in the past hour
WIND DIRECTION: In letters or degrees
Note: The conversion is displayed as a wind direction display or 1 hour top speed can only be operated under the
main display interface.
View history: Press and release the “ ” button to view the maximum wind history values: 1 Hour (default) | 24 Hour | 7
Days | Month | Year
Note: One Hour: past 60 minute period (default Top Speed record, already shown)
24 hour: Past 24 hour period, from last record
7 Days: Past 7-day period, from last record
Month: Defned by Calendar Month i.e. January 1 - January 31
Year: Defned by Calendar Year i.e. January 1 - December 31
In the mode of viewing wind speed history, press and hold the “ ” button for 3 seconds to clear all history of wind speed.
Note: Wind speed reading will reset to current wind speed.
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the view
meteo – SP89 Manual
Alarm function control
Press and release the “ ” button to view the alarm 1 time, press and release the button to view the alarm 2 time, the
third release and release the button to exit the viewing mode.
In the mode of viewing the alarm 1 time or the alarm 2 time, press and release the “ ” button to control its alarm function
to be turned on or off.
Note: When the function of Alarm 1 or Alarm 2 is turned on, the symbol “ ” or “ ” is displayed.
At the same time, the
relevant alarm repeat symbol “ ” | “ ” is displayed
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the view
mode.
Alarm and Snooze settings
Press and hold the “ ” button for 3 seconds to enter the alarm and snooze setting mode.
Press and release the “ ” or “ ” button to adjust the value. Hold the “ ” or “ ” button to adjust quickly.
Press and release the “ ” button to confirm and move to the next item.
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the
settings.
Settings order:
1. Alarm 1 hour
2. Alarm 1 minutes
3. Alarm 1 repeat: M-F | S-S | M-S
4. Alarm 1 snooze time: 5 to 60minutes | OFF
5. Alarm 2 hour
6. Alarm 2 minutes
7. Alarm 2 repeat: M-F | S-S | M-S
8. Alarm 2 snooze time: 5 to 60minutes | OFF
Note: The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to Friday, the Saturday and
Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm function will be activated on Saturday
and Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set to display both M-F and
S-S, the alarm function will be activated throughout the week.
Note: The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit
is minutes.
Note: The alarm will sound for 1 minutes if you do not deactivate it by pressing any button. In this case the alarm will
be repeated automatically after 24 hours.
Note: Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal
The alarm sound when the trigger, press any buttons except the “ ” touch button or touch and hold the “ ”
To Next Page
Loading...