To Next PageTo Next Page
Need help?Do you have a question about the meteo SP89 and is the answer not in the manual?
Enables automatic time synchronization via DCF radio signals.
Features a calendar function that extends to the year 2099.
Allows selection of the day of the week display in seven different languages.
The station supports setting up to two daily alarms.
Configurable snooze function for alarms, adjustable from 5 to 60 minutes or off.
Specifies indoor (0-50°C) and outdoor (-40-70°C) temperature ranges.
Defines the indoor humidity measurement range between 20% and 95%.
States the air pressure measurement range in hPa, inHg, and mmHg.
Specifies the rain measurement range from 0 to 9999mm (or 0-393.6 inches).
Defines wind speed (0-180 km/h) and direction (0-359°) ranges.
Covers RF frequency (433.92MHz) and transmission range (100m).
Ability to record historical data for temperature, humidity, wind, and rainfall.
Provides alerts for critical changes in temperature, humidity, wind speed, and rainfall.
Shows 'feels like' temp, wind chill, heat index, and dew point.
Includes a function for predicting future weather conditions.
Features a backlight with three adjustable brightness levels.
Supports charging via a USB connection.
Specifies power adapter (DC5V1.2A) and battery (AA) requirements for all units.
Details the components and labels of the positive LCD display.
Identifies and describes the various buttons on the weather station.
Details external features of the main weather station unit.
Identifies external components of the multi-combination wireless sensor.
Details the external features of the temperature/humidity wireless sensor.
Details the external components of the remote sensor unit.
Lists necessary tools (screwdriver) and fresh batteries for setup.
Guidance on initial placement for optimal setup and sensor connection.
Steps for inserting batteries into sensors and connecting the weather station.
Instructions for placing remote sensors outdoors for initial connection.
Recommendations for placing the weather station to avoid interference.
Step-by-step guide for manually setting time and units on the station.
Lists configurable settings including beep, temperature unit, pressure, wind, rain, and RCC.
Information on setting the time zone relative to German time.
Describes the automatic search for RCC signals after power-on.
Instructions for initiating a manual search for the RCC signal.
Explains the meaning of the flashing and continuous radio mast icons.
Notes on signal quality degradation beyond a certain distance from the transmitter.
How to view the set times for Alarm 1 and Alarm 2.
Procedure to turn the alarm functions for Alarm 1 and Alarm 2 on or off.
Procedure to enter and navigate the alarm and snooze setting mode.
Configuration for alarm repeat cycles (M-F, S-S) and snooze duration.
Details on alarm sound duration, repetition, and volume changes.
How to activate the snooze function when an alarm rings.
Instructions to exit the snooze mode and stop the alarm.
Accessing High/Low records for temp, humidity, feels like, heat index, wind chill.
How to switch to view records of other connected sensors.
Procedure to clear all historical indoor/outdoor temperature and humidity data.
Explanation of icons indicating temperature/humidity rising, falling, or unchanged.
How to switch display between wind direction and 1-hour top speed.
Accessing historical wind speed data for 1 hour, 24 hours, days, month, and year.
Procedure to clear all historical wind speed records.
Switching display between cumulative rainfall and rainfall rate.
Accessing rain history for 30 min, 60 min, 24 hrs, day, 7 days, month, year, and total.
Procedure to clear all historical rainfall records.
Process for connecting up to one multi-combination and three temp/humidity sensors.
How to view data from different wireless sensor channels.
Explanation of how channel data (OUTDOOR, CH1-3) is displayed, including low voltage.
Procedure to add new sensors or replace batteries in existing ones.
How to enter and navigate the weather alert viewing mode.
How to switch between outdoor and remote sensor alert views (CH1-CH3).
Procedure to turn specific weather alerts on or off.
Guide to entering and adjusting thresholds for weather alerts.
List of alerts that can be viewed and set: temp, humidity, wind speed, rainfall.
Explains that forecasts are based on barometric pressure trends.
Details the meaning and conditions for displaying various weather icons.
Notes on forecast stability and accuracy after initial calibration.
How to control backlight brightness and duration via buttons.
Details on backlight behavior when using adapter vs. batteries.
Explanation of the low battery icon and when to replace batteries.
Provides options and recommendations for mounting the temp/humidity sensor.
Guidance for mounting the main sensor unit in an open area.
Instructions for tightening nuts and screws for sensor stability.
Guidance on orienting the solar panel south and ensuring the sensor is level.
Ensuring screws for wind cups and direction cursor are tightened.
Regular cleaning procedures for the rain funnel and sensor.
Ensuring the sensor is within 100 meters of the station for optimal data transmission.
Notes on how obstacles can shorten effective wireless signal distance.
General| Rainfall Resolution | 0.3mm |
|---|---|
| Humidity measuring range | 1% to 99% |
| Humidity Range | 1% to 99% |
| Wireless range | 100 m |
| Wind Direction Range | 0 to 360 degrees |
