Metra Electronics 95-3005 - Kit Assembly; Secure Radio Brackets; Wiring and Antenna Connections; Radio Assembly Installation

REV. 12/4/2018 INST95-3005
3
KIT ASSEMBLY
(Figure A)
1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Clip the radio assembly into the dash.
4. Reassemble the dash in reverse
order of disassembly to complete the
installation.