Metra Electronics 95-7802CH User Manual

METRA - The World’s best kits
®
metraonline.com
REV. 11/20/2017 INST99-7802CH
Installation instructions for part 95-7802CH
®
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
U.S. PATENT # D723,537
• ISO DDIN radio provision
• Painted Charcoal
• A) Radio housing • B) Radio brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729
Antenna Adapter: •40-HD11
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
Honda CR-V 2012-2016
95-7802CH
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
A
B

Metra Electronics 95-7802CH Specifications

General

Brand	Metra Electronics
Model	95-7802CH
Category	TV Mount
Weight Capacity	125 lbs
Tilt Range	15 degrees
Material	Steel
Color	Black

Summary

Dash Disassembly

Remove A/C Vents and Radio Screws

Instruction to unclip A/C vents and remove Phillips screws securing the factory radio.

Remove Hazard Button and Panel Clips

Instruction to remove Phillips screws for hazard button and panel clips from the trim panel.

Kit Preparation

Attach Factory Panel Clips

Instruction to attach the six factory panel clips to the radio housing.

Attach Factory Hazard Button

Instruction to attach the factory hazard button to the radio housing using factory screws.

Kit Assembly

Mount Radio Brackets

Instruction to attach radio brackets to the radio using supplied screws.

Connect Wiring and Reassemble

Locate wiring, connect antennas, and secure the radio, reassembling dash in reverse order.

Important Installation Support

Contact Tech Support

Call Tech Support at 1-800-253-TECH for installation assistance, review instructions first.

Installer Certification

Information on enhancing skills via the Installer Institute and MECP certification.