95-5026
KIT ASSEMBLY
6
2
A
Slide the DDIN radio unit into the
trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head unit.
(
Figure B)
3
Position the rear support bracket
with slide grooves facing down and
secure to the back of the aftermar-
ket radio with the hardware supplied
with aftermarket head unit.
(
Figure C)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (
Figure A)
1
B
C
DOUBLE DIN HEAD UNIT PROVISION
To Next Page
Loading...
