To Next PageTo Next Page
Need help?Do you have a question about the Metra Electronics 95-8904B and is the answer not in the manual?
General| Brand | Metra Electronics |
|---|---|
| Model | 95-8904B |
| Category | Automobile Accessories |
| Language | English |
Details DDIN radio provision, ISO stacked provision, and matte black finish of the kit.
Lists included parts: DDIN Trim Plate (A) and DDIN Brackets (B).
Specifies necessary aftermarket wiring and antenna adapters, sold separately.
Outlines tools needed: Phillips screwdriver, panel tool, utility knife, small flat blade screwdriver, hacksaw.
Instruction to disconnect the negative battery terminal to prevent accidental short circuits.
Steps to unclip and remove the radio trim panel including the A/C vents.
Guidance on removing the four Phillips screws securing the factory radio unit.
Locate wiring, use adapters, reconnect battery, and test the new radio's operation.
Secure the Double DIN brackets to the Double DIN trim plate assembly.
Slide the head unit into the bracket assembly and secure it with supplied screws.
Cut inside of lower mounting holes in the dash bracket for proper head unit fitment.
Reassemble the dashboard components in the reverse order of the initial disassembly.
