Metra Electronics 99-7319 - Dash Disassembly Procedure; Initial Panel and Shifter Removal

99-7319
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip and remove panel surround-
ing shifter including cup holders.
(Figure A)
2
Unclip and remove panel surround-
ing radio and a/c control.
(Figure C)
4
2004-2006 KIA AMANTI
Remove (2) Phillips screws at base
of panel surrounding radio and a/c
controls.
(Figure B)
3
DASH DISASSEMBLY
A
P
R
N
D
B
E
S
P
C